Equipment profile
Reinforced deck for heavy, over-width, or difficult-to-load cargo requiring open sides.
Back to container library
Flatracks / platform
20-foot flat rack
Reinforced deck for heavy, over-width, or difficult-to-load cargo requiring open sides.
Technical drawing
Switch views before you plan the loading method.
Each drawing highlights a different booking checkpoint. The figures are representative planning values; Senate Freight will confirm the assigned unit, payload, carrier acceptance, and route availability before shipment.
SSenate
Freight20′ flat rack
Freight20′ flat rack
Inside dimensions
5,638 mm long, 2,438 mm wide, 2,194 mm min. high.
Door or access opening
Open sides wide and Open top high. Side and top access
Weight planning
Typical maximum gross 45,000 kg, tare 2,900 kg, and payload 42,100 kg.
Specification sheet
Dimensions, ISO codes, and weight references.
Use this as a planning sheet for quoting, cargo drawings, and pre-loading checks. Final figures depend on the actual container released by depot or carrier.
- Container
- 20-foot flat rack
- ISO type group
- 22 PC
- ISO size type
- 22 P3
- Capacity
- Deck based
- Internal dimensions
- 5,638 mm × 2,438 mm × 2,194 mm min.18′ 6″ × 8′ × 7′ 2 3/8″ min.
- Door / access
- Open sides × Open topSide and top access
- Max gross
- 45,000 kg
- Tare
- 2,900 kg
- Max payload
- 42,100 kg
Cargo-fit checklist
What Senate Freight checks before release.
The right equipment choice is a combination of cargo envelope, route, loading method, and handling safety.
- 01
Confirm lashing points, deck contact area, and centre of gravity.
Share packed dimensions, gross weight, photos, drawings, and handling notes for confirmation.
- 02
Out-of-gauge width or height requires route, vessel, and terminal approval.
Share packed dimensions, gross weight, photos, drawings, and handling notes for confirmation.
- 03
Cargo must be blocked, braced, and protected from exposure.
Share packed dimensions, gross weight, photos, drawings, and handling notes for confirmation.